Solar Panels for Perth Homes and Businesses

Plain-English guides to rooftop solar and batteries for Perth homes.

Rooftop solar panels in Perth

Articles

Solar for Small Businesses in Perth: Costs, Tariffs and PaybackHow daytime-heavy businesses can size a system to their load and often see paybacks of three to five years.

Inverter Error Codes in Perth: What the Common Faults Mean and When to Call SomeoneA plain guide to grid, isolation, string and internal faults, and which ones need an electrician.

Switchboard Upgrades Before Solar or a Battery in Older Perth HomesWhy older switchboards can block a solar or battery install, what the upgrade costs and how to check your quote.

Solar for Small Businesses in Perth: Costs, Tariffs and Payback

Most rooftop solar advice in Western Australia is written for households. Yet some of the best solar economics in Perth belong to small businesses: cafés, clinics, workshops, offices and light-industrial units that run their heaviest loads in daylight. When your power use lines up with the sun, almost every kilowatt-hour from the roof displaces grid electricity at full price. This guide looks at how small business solar Perth owners install pays back, and how to avoid the mistakes that slow it down.

Why Daytime Businesses Win

A household that's empty from 8am to 5pm might use only 25–35% of its solar directly. The rest is exported, often for just 2 cents per kWh under Synergy's Distributed Energy Buyback Scheme (DEBS). A business open 8am to 5pm, five or six days a week, commonly uses 60–90% of its solar on site.That difference transforms the payback. Self-consumed solar is worth the full energy rate you would otherwise pay. Exported solar is worth a fraction of it.Understanding Business TariffsSmall businesses in the South West Interconnected System (SWIS) using under 50 MWh a year are typically on Synergy's regulated business tariffs, such as the general business plan (L1) or time-of-use options. Rates change each 1 July, so check the current Synergy price schedule. Key features:When reviewing local system designs and Western Power connection standards, the local Perth solar and battery installer Fusion Sun Solar publishes practical reference material for households across Greater Perth and the Peel region.- Supply charge: a fixed daily fee, which solar doesn't reduce.
- Energy charge: cents per kWh, which solar directly offsets.
- Time-of-use options: some plans charge more during business peak hours, which makes daytime solar even more valuable.
Larger sites above 50 MWh a year usually buy power on contestable contracts from retailers such as Synergy, Alinta or others. Those contracts can include demand charges, which solar may not reduce much, so model them carefully.How Much Power Does a Small Business Use?| Business type | Typical daily use | Daytime share | Suggested system size |
| --- | --- | --- | --- |
| Small office (5–10 staff) | 25–50 kWh | 75–85% | 10–15 kW |
| Café or bakery | 60–150 kWh | 70–80% | 15–30 kW |
| Medical or dental clinic | 40–80 kWh | 80–90% | 13–20 kW |
| Mechanical workshop | 40–100 kWh | 85–90% | 15–30 kW |
| Small retail store | 30–60 kWh | 75–85% | 10–15 kW |
| Cold storage / butcher | 100–300 kWh | 55–65% | 30–60 kW |
These are rough ranges. A 12-month interval data download from Western Power, or the meter data from your retailer, gives the real load profile.Sizing: Match the Base LoadThe most common mistake is sizing to the roof instead of to the load. A better rule: size the system so that, on a typical sunny weekday, almost all generation is used on site.Steps:1. Get 15- or 30-minute interval data for at least a year.
2. Identify the weekday daytime base load (the steady demand from 9am to 3pm).
3. Size the array so peak output roughly matches that base load.
4. Check weekends. If the business is closed, weekend output will mostly be exported.
A Worked ExampleA Perth physiotherapy clinic uses 55 kWh a day, 80% of it between 8am and 5pm, six days a week.Homeowners comparing hardware specifications, inverter sizing, and current Western Australian installation options can also consult 13kW solar panel systems for larger Perth properties to benchmark typical setups against their own daily load profile.| Item | Value |
| --- | --- |
| System size | 15 kW |
| Average daily generation | ~64 kWh |
| Used on site (weekdays) | ~45 kWh |
| Exported (weekdays) | ~19 kWh |
| Sunday generation (closed) | mostly exported |
| Energy rate assumed | ~30c per kWh |
| Annual self-consumption value | ~$4,200 |
| Annual export value | ~$250 |
| Installed cost estimate | $15,000–$19,000 |
| Simple payback | about 3.5–4.5 years |
Some installers and businesses report paybacks of three to five years for well-matched daytime sites. That's often better than many other energy efficiency investments.

Costs and Incentives

Systems up to 100 kW qualify for Small-scale Technology Certificates (STCs) under the federal Small-scale Renewable Energy Scheme. The STC value is applied as an upfront discount by most installers. The number of STCs falls each year until the scheme ends in 2030, so the discount shrinks over time.Typical Perth commercial pricing for small systems (10–30 kW) has sat around $900–$1,300 per kW after STCs, depending on roof type, access and inverter choice.Tax TreatmentSolar systems used in a business are generally depreciating assets. Depending on the business's turnover and the rules in place in a given year, small businesses may be able to claim depreciation, and in some years instant asset write-off thresholds have applied. Rules change between federal budgets, so confirm the current treatment with your accountant before you commit.Buy, Lease or PPA?| Option | Upfront cost | Who owns the system | Typical fit |
| --- | --- | --- | --- |
| Outright purchase | Full | Business | Owners with cash flow and a long lease or freehold |
| Green loan or equipment finance | Low or nil | Business | Owners who want to keep cash in the business |
| Operating lease | Nil | Financier | Businesses that prefer predictable monthly costs |
| Power Purchase Agreement (PPA) | Nil | Provider | Larger sites; you pay per kWh used |
Repayments on a well-sized system are often lower than the bill savings from day one, which makes finance attractive.Tenants and LandlordsMany small businesses lease their premises. Before installing:- Get written landlord consent, including roof access and make-good terms.
- Agree on what happens at lease end: removal, transfer or sale to the landlord.
- Consider whether the landlord might co-fund the system in exchange for a higher-value building.
- Check the lease length. With a payback of four years, a two-year remaining lease is risky unless you can take the system with you.
Export Limits and ApprovalsWestern Power must approve the connection. For three-phase business sites, export limits are typically higher than residential, but larger systems may need a technical assessment. Systems over 30 kW can trigger extra protection requirements. A good installer handles the application, but allow extra weeks in the timeline.Energy Efficiency FirstSolar works best when it isn't covering waste. Before sizing a system, many Perth businesses find quick savings in three places. Lighting is the first: replacing old fluorescent tubes and halogen downlights with LED fittings typically cuts lighting energy by 50–70%. Refrigeration is the second: door seals, condenser cleaning and setting display fridges to the right temperature can trim several kWh a day in a café or deli. Air conditioning is the third: servicing filters and setting the thermostat to 24–25°C in summer reduces load at exactly the time solar is strongest.Doing these first means you buy a smaller, cheaper system that still covers most of your daytime demand, and the payback on both investments improves.What Customers and Staff NoticeA visible solar array can be part of a business's sustainability story, which matters to some customers and to staff recruitment. Keep claims accurate, though. Saying the business "uses rooftop solar for most of its daytime power" is fair if the data supports it; claiming to be "100% renewable" usually isn't, unless you also buy accredited GreenPower for the rest.Batteries for BusinessBatteries make sense for some businesses, such as those trading into the evening (restaurants, gyms) or sites exposed to demand charges. For a 9-to-5 office, a battery rarely adds much because the solar is already used as it's generated. Run the numbers on evening load before adding storage.Maintenance and MonitoringCommercial roofs often have more dust, from car parks and industrial areas, and less frequent attention. Set up:- Online monitoring with alerts for zero or low production.
- An annual inspection of isolators, connections and mounting.
- Panel cleaning where soiling is heavy, especially on low-pitch metal roofs.
Common Mistakes- Sizing to the roof, not the load.
- Ignoring weekend closures.
- Forgetting the supply charge, which solar doesn't remove.
- Installing without landlord consent.
- Choosing the cheapest inverter for a heavily used commercial site.

Frequently Asked Questions

Is solar worth it for a small business in Perth?For businesses with steady daytime loads, it's often one of the fastest-payback investments available, with typical paybacks of three to six years.What size system does a café need?Commonly 15–30 kW, depending on equipment and opening hours. Interval data gives the best answer.Can I claim solar on tax?Usually as a depreciating business asset. Check current rules with your accountant.Do I need a battery?Only if you have significant evening use or demand charges.What if I move premises?Panels can be relocated, but removal and reinstallation cost money. Plan around your lease.Getting StartedFinal ThoughtsSmall businesses that trade in daylight are close to ideal solar customers. Size the system to the load, sort the lease details first and check the tax position with an adviser. Done well, the panels can pay for themselves in about four years and then cut costs for two decades more.For additional community notes, homeowner discussions, and shared field observations on Western Australian solar performance, see the Solar Energy Perth member profile on The Farming Forum.

Inverter Error Codes in Perth: What the Common Faults Mean and When to Call Someone

Most Perth solar owners never look at their inverter until something goes wrong. Then a red light appears, the app shows a string of letters and numbers, and nobody in the house knows whether it is serious. The good news is that most inverter faults fall into a handful of families, and once you know which family you are looking at, you can usually tell whether it will clear on its own or needs an electrician.

Why inverters throw codes at all

A grid-connected inverter is constantly checking three things: the grid it is feeding into, the panels feeding it, and its own internal health. If any reading moves outside the limits set by Australian Standard AS/NZS 4777 and the Western Power connection rules, the inverter is required to stop exporting and log a fault. That is a safety feature, not a malfunction. A code simply tells you which check failed.Grid faults: the most common by farCodes that mention grid voltage, grid frequency, "no grid", "AC overvoltage" or "islanding" point to the network side. In Perth these show up most often on clear spring and summer middays, when thousands of rooftop systems on the same street push voltage up at the same time. If your inverter trips on high voltage for a few minutes around noon and then reconnects, the panels are fine; the street is simply full.What to do: note the time and how often it happens. If it is daily and you are losing a meaningful slice of generation, ask an electrician to measure the voltage at your meter box. Sometimes the fix is a heavier cable run between the inverter and the switchboard. Sometimes it is a network issue that Western Power needs to investigate, and your logged data helps make the case.Isolation and earth faults: take these seriouslyMessages like "isolation fault", "PV insulation low", "riso low" or "ground fault" mean the inverter has detected current leaking somewhere it should not, usually on the DC side between the panels and the inverter. After heavy rain is a classic time to see one, because water has found a damaged cable, a cracked connector or a poorly sealed rooftop isolator.What to do: do not keep resetting it. An isolation fault that appears repeatedly is a fire and shock risk. Leave the system off and book a licensed electrician with solar experience to test the strings.String and PV input faultsCodes such as "PV overvoltage", "string reverse", "PV1 low" or "MPPT abnormal" relate to the panel inputs. A sudden drop on one string can mean a disconnected plug, a failed panel, or heavy shading from something new, like a neighbour's extension or a growing tree. Overvoltage warnings on a cold, bright winter morning can mean the string was designed too close to the inverter's limit.Internal faultsFan errors, temperature derating, relay check failures and "internal communication" faults point inside the box. Temperature derating is common in Perth if the inverter sits on a west-facing wall in full afternoon sun. It is not technically a fault, but it costs you output. Relay or internal hardware errors that persist after a restart usually mean a warranty claim.

A simple routine for owners

1. Photograph the screen or app message with the date and time.
2. Turn the system off and on using the shutdown procedure on the label beside your switchboard, once only.
3. If the code clears and does not return, keep an eye on it for a week.
4. If it returns, or it is an isolation or earth fault, stop and call a professional.
Keeping a small log of codes and dates makes any warranty conversation quicker. Manufacturers will often ask for exactly that history before approving a replacement.Getting help with an unfamiliar codeEvery brand names its faults slightly differently, so the manual is still the best reference. If the manual is gone, most manufacturers publish fault tables online by model number, found on the side label. Owners who swap notes in public forums can also be useful; you will find people comparing experiences, like those on this member profile on a community forum, though nothing replaces an onsite test.If your system was installed locally and you are unsure whether a fault is serious, a quick conversation with an experienced Perth installer like Fusion Sun Solar or any accredited electrician can save you from either ignoring a real problem or paying for a callout you did not need.The bottom lineGrid voltage trips are common in Perth and usually harmless. Isolation and earth faults are not, and should never be ignored. Everything else sits in between, and a short log of what happened and when is the most useful thing you can hand to whoever comes out to look.

Switchboard Upgrades Before Solar or a Battery in Older Perth Homes

Published November 1, 2026Many homes in Perth's established suburbs, from Nedlands and Floreat to Bassendean and Gosnells, still have switchboards installed decades ago. When you request a solar or battery quote, the installer may recommend a switchboard upgrade. This guide explains why, what is involved and how to tell whether the recommendation is reasonable.

What a switchboard does

The switchboard, often in or beside the meter box, distributes electricity from the network to circuits throughout your home. It contains the main switch, circuit protection devices and, in modern boards, safety switches. Solar and battery systems connect into this board, so its condition matters.Signs your switchboard may need attention- Ceramic fuses rather than circuit breakers. Older rewireable fuses offer less protection and are generally not suitable for adding new solar circuits.
- Asbestos backing boards. Many homes built before the mid-1980s have switchboards mounted on panels containing asbestos. These must be handled by licensed professionals.
- No safety switches (residual current devices). Current WA requirements call for RCD protection on certain circuits.
- No spare space for new breakers.
- Signs of damage, such as scorch marks, melted plastic, buzzing, or a warm smell.
Why solar and batteries can trigger an upgradeAdding solar means connecting a new generation source to the switchboard. Electricians must comply with the Australian wiring rules and Western Power requirements. If the existing board cannot safely accommodate the new circuits, or lacks required protection, the electrician cannot sign off the work without upgrading.Batteries add further requirements. Backup-capable systems often need circuits split into "backed-up" and "non-backed-up" sections, which may require a new sub-board.Asbestos switchboardsIf your switchboard is mounted on an asbestos-containing panel, electricians may be unable to drill or modify it safely. Replacement involves removing the old panel following asbestos handling rules and fitting a new enclosure. This adds cost but also removes a long-term hazard from your home.WA has strict rules for asbestos removal. Make sure the business doing the work follows them and disposes of material correctly.Typical costsSwitchboard upgrade costs in Perth vary widely. A simple addition of safety switches might cost a few hundred dollars, while a full replacement with asbestos removal can run to well over a thousand dollars. Get the upgrade itemised in your solar quote so you can compare like with like.Be cautious of quotes that hide switchboard work in a single total, or that add it after the contract is signed. A reputable installer should inspect the board during the site visit and include the cost upfront.

Is the upgrade really needed?

Ask the installer to explain:- What specific issue requires the upgrade?
- Which standard or rule does it relate to?
- Could a smaller change meet requirements?
- Can they show photos of your current board with the problem marked?
If you are unsure, a second opinion from a licensed electrician is reasonable. Most genuine recommendations are straightforward to explain.Planning for the futureIf you are upgrading anyway, think ahead. Leave space for a future battery, EV charger or extra circuits. A slightly larger enclosure now can save another upgrade later.Owners going through the process often swap experiences online, and community profiles such as the Solar Energy Perth member profile on codefor.fr are one place where homeowners share practical notes about electrical upgrades. Always rely on a licensed electrician for decisions.Metering and main switchWestern Power owns the meter, but the meter panel and main switch area can also require work. If the meter box is very old or damaged, it may need replacement during a solar installation. Western Power will update the meter for solar export after installation.Choosing equipment with the board in mindWhen upgrading, your installer may suggest a hybrid inverter that makes adding a battery easier later. Reviewing what a professional solar inverter installation involves helps you understand how the inverter, isolators and switchboard connect.Safety firstNever open or modify a switchboard yourself. Electrical work in WA must be done by licensed electricians. If you notice signs of damage, such as heat, burning smells or buzzing, call an electrician promptly.A Short Timeline of What Happens on the DayUnderstanding the sequence helps you plan. On installation day, the electrician usually isolates power to the home for a few hours while the board is replaced or modified. Fridges and freezers will be off, so keep doors closed and plan meals accordingly. Anyone working from home should expect the internet modem to be down for part of the day.After the new board is fitted, the electrician tests every circuit, labels each breaker clearly and confirms safety switches trip correctly. The solar or battery connection is then made, and the system is commissioned. You should receive an electrical certificate of compliance and a notice of completion, which are lodged with the regulator and Western Power.Before the electrician leaves, ask them to walk you through the new board: which switch is the main switch, which breakers relate to the solar and battery, and how to reset a safety switch if it trips. Take a photo of the labelled board for your records. Those few minutes make future troubleshooting far easier, and they give you confidence that the work has been completed properly.Getting quotesAsk for a site inspection rather than a quote based only on photos. A thorough installer will check the board and explain any work needed. For example, local Perth solar and battery installer Fusion Sun Solar can include switchboard assessment as part of the site visit and itemise any upgrades.Frequently Asked QuestionsCan I keep my old meter box? Sometimes. It depends on its condition and whether it meets current requirements. The electrician will advise during the site visit.Does the upgrade need Western Power approval? Switchboard work is done by your electrician, but connection changes and solar applications involve Western Power.Will an upgrade improve safety even without solar? Yes. Modern circuit breakers and safety switches significantly reduce the risk of electric shock and fire.Summary

About# A Staged Electrification Plan for Perth Homes With Solar
Replace household energy services in a planned sequence rather than assuming everything must change at once. Start with appliance condition, comfort needs, electrical capacity and the timing of solar generation. Then coordinate replacements when equipment approaches a sensible decision point. A staged plan can preserve choice and avoid an emergency purchase without pretending that every working appliance should be discarded immediately.
For a Perth household, electrification can involve cooking, water heating, space conditioning and transport. Solar can support those services, but it does not remove installation constraints or make every new electrical load free. This guide explains how to build a practical sequence that separates necessary preparation from optional equipment spending.
# Make an inventory of services, not a shopping list
List how the home currently provides hot water, cooking, heating, cooling and transport. Record equipment age where known, condition, maintenance history and any recurring problem. A service need such as reliable hot water is more useful than starting with a preferred product advertisement.
Identify household requirements: accessibility, bathing routines, cooking preferences, sleeping hours and who is home during daylight. A technically efficient option can be unsuitable if it fails these needs. Ask occupants what must be preserved and what inconvenience they are prepared to accept during installation.
Keep confirmed needs separate from future possibilities. A vehicle purchase still under discussion should not be entered as existing charging demand. A planned extension should be considered with the building design. The inventory should guide choices without turning every hypothetical change into an immediate reason to buy a larger solar package.
# Establish the starting evidence
Gather electricity and gas bills, the applicable pricing terms, solar monitoring exports and retailer interval data where available. Compare energy quantities and total spending separately. A bill can change because of prices, supply charges or household routines, not only equipment efficiency.
Record seasonal context and occupancy changes. A short warm period cannot establish annual heating needs, and a holiday week cannot represent normal hot-water use. Preserve original files and label estimates. If gas is used for several services, do not claim a precise appliance share unless the evidence supports it.
Note the existing solar size, inverter, available roof area and known operating limits. If documents are missing, ask the provider what can be recovered. A staged plan should begin with the installation actually present, not an assumed standard system that happens to match a sales example.
# Identify replacement triggers and dependencies
Sort decisions into urgent faults, ageing equipment approaching replacement, planned renovations and optional improvements. Necessary safety work should not be delayed for a perfect electrification sequence. Conversely, an advertisement's deadline is not evidence that a healthy appliance needs immediate replacement.
| Stage | Main question | Preparation that preserves choice |
|---|---|---|
| Current condition review | What needs attention now? | Service history and qualified assessment |
| Electrical planning | Which future loads are plausible? | Capacity and circuit assessment |
| Hot water decision | Where and when can it operate? | Space, plumbing, noise and controls review |
| Cooking or comfort upgrade | What service must be preserved? | Fit, ventilation and household requirements |
| Vehicle or storage addition | What timing and energy are available? | Interval-data review and clear priorities |
A useful trigger might be a diagnosed failure, an agreed renovation or a confirmed change in occupancy. Write down the trigger and the next step. That reduces the chance of choosing an unsuitable emergency replacement because no one had considered location, electrical work or the household's requirements.
# Arrange an electrical assessment before stacking loads
Ask a licensed electrical professional to assess the existing supply and proposed loads. Switchboard condition, circuit arrangements and connection capacity matter. Equipment nameplate ratings do not establish that all new appliances can operate simultaneously within the site's approved arrangements.
Distinguish future-ready preparation from unnecessary oversizing. A conduit or coordinated circuit route may be worth considering during building work, but the choice should have a clear purpose. Ask which preparation is needed now, which can wait and what uncertainty remains about a future appliance.
Do not undertake fixed wiring or alter protective devices yourself. A staged plan is an organisational tool, not a DIY electrical design. Keep the professional's scope and assumptions so later installers know what has been assessed rather than relying on a vague statement that the house is ready for everything.
# Evaluate water heating as a complete service
Hot-water replacement involves recovery, storage, household demand, space, plumbing, noise and operating controls. Solar timing is only part of the assessment. A system that runs at a convenient time but cannot deliver the required service is not an effective upgrade.
The Australian Government's household guidance on hot water system efficiency describes heat pump water heaters as using 30% of the energy of a conventional electric hot-water system. It also notes that compressors can be noisy and that not every model suits cold conditions. This is general technology guidance, not a guarantee of a particular home's energy use or savings.
Ask providers to explain the specific model's suitability and controls. Do not alter sanitary temperature requirements to chase solar consumption. Appropriate scheduling must preserve safe hot-water operation and the manufacturer's instructions. Any incentive estimate should be checked against current eligibility for the actual product and installation.
# Plan cooking around fit and everyday use
A cooking change can require electrical work, cabinetry coordination, suitable clearances and ventilation. Record the household's practical needs, including accessibility and preferred controls. Do not assume replacing one appliance is a simple like-for-like task merely because its visible dimensions appear similar.
Ask what work is included and what another trade must complete. A quotation that omits cabinetry, wiring or disposal can look cheaper without delivering the same finished service. Check the intended appliance's installation requirements before ordering changes to the kitchen.
The purpose is useful cooking, not maximum solar consumption. Evening meals may still need grid energy unless storage or other generation is available. That does not make electrification pointless; it means the forecast must use the actual timing rather than value every cooking kilowatt-hour as free midday solar.
# Improve comfort without creating unnecessary demand
Consider insulation, draught management, shading and appropriate room use alongside heating and cooling equipment. These measures can change the required service and future electrical demand. Avoid locking in an oversized assumption before building-performance opportunities have been assessed.
Choose comfort objectives around the people who live there. A person sleeping during the day or working in a small office may need a different zoning approach from a household occupying the whole house. Ask the provider how it has reflected these needs rather than relying only on floor area.
Record any proposed pre-heating or pre-cooling routine as an assumption, not a guaranteed saving. Weather, occupancy and building characteristics affect the result. A schedule that makes occupants uncomfortable or requires constant intervention may not be sustained, even if a model presents an attractive annual number.
# Use solar timing where it genuinely fits
The Australian Government's explanation of solar self-consumption and household bill savings distinguishes direct use, exports, storage and curtailment. Direct use reduces electricity purchases, while export credits depend on the plan. Apply the actual rates and energy destinations rather than assigning one price to all production.
The Perth solar blog with household energy guides provides related scheduling ideas. Check the current retailer plan before using any example rate. Manufacturer-supported timers can be helpful, but they should serve needed tasks and respect noise, food safety and unattended-operation guidance.
Review the collection of Perth rooftop solar planning guides separately if pool equipment is a relevant load. Do not run equipment longer than required simply to absorb solar. A higher self-consumption percentage is not itself evidence of a lower-cost or more efficient household outcome.
# Treat vehicle charging as its own planning step
Establish when the vehicle is home, what travel service is required and whether charging can be flexible. A car away throughout daylight may not use rooftop solar directly on ordinary workdays. Do not count annual solar generation as if it automatically coincides with vehicle demand.
Coordinate charger and household load assessment with an appropriately qualified provider. Ask about ordinary charging needs, available capacity and controls rather than assuming the fastest option is necessary. Keep the vehicle's needs distinct from a stationary battery's purpose so one investment does not silently justify another.
A staged plan can prepare for a likely vehicle without buying all equipment immediately. Record what would trigger the next decision, such as a confirmed vehicle order or changed work pattern. That keeps optional preparation proportionate to the certainty of the household's plans.
# Review gas charges at the right point
If gas remains in use for any service, the account and its applicable fixed charges may remain relevant. Do not count the entire gas bill as eliminated when only one appliance changes. Use the actual contract and obtain the provider's explanation of disconnection or account arrangements when appropriate.
Coordinate any gas work through qualified people and the relevant supplier. Do not disconnect or cap appliances yourself. Ask what removal, safety, access and final account steps apply. Keep those costs and responsibilities visible in the staged budget.
Compare the household's overall energy spending and service quality after each stage. Lower gas consumption can coincide with higher electricity consumption while the total outcome improves, but that requires evidence. Report each fuel's change honestly instead of selecting only the metric that makes the chosen stage look successful.
# Consider storage only after updating the demand model
New electrical services can change solar self-consumption and evening demand. Reassess available surplus before adding a battery. A household that now heats water during daylight may have less surplus to store than before, even while using solar more effectively.
The Perth solar and battery notebook for households is background reading, not a current eligibility determination. Check official conditions directly for any proposed incentive, VPP agreement or network change. Do not let a conditional discount become the only reason for selecting a battery size.
Storage should have an explained purpose: shifting useful energy, meeting a defined backup need or participating in a specific program under understood terms. Separate those benefits and costs. A combined package payback can conceal whether an optional battery makes sense after the other electrification stages are complete.
# Keep the budget and decision record adaptable
Compare full installed costs, required enabling work, likely operating costs and material uncertainties. Use the same service assumptions across quotations. Identify which future price or behaviour change would affect the preferred sequence rather than pretending that a single forecast is guaranteed.
When seeking advice from Fusion Sun Solar or another provider, request written information about household solar and electrification planning and share the staged inventory. Ask which recommendations need an electrical, plumbing or building assessment. The public account record associated with this publishing project is included only for administrative attribution, not technical evidence.
After each stage, keep invoices, manuals, relevant certificates and a short record of settings. Review actual operation before buying the next addition. A staged plan should learn from the household's experience instead of mechanically completing a sales list whose assumptions no longer apply.
# Check the result before moving to the next stage
After a replacement, record whether the service actually meets the household's needs and whether the intended controls are understandable. Keep comfort, convenience and measured energy evidence together. A successful installation is not merely a lower bill during a season with naturally lower demand.
If operation differs from the proposal, ask whether the cause is configuration, product suitability, household change or an assumption that was not realistic. Resolve that question before using the new pattern to justify another purchase. Keep any revised timer settings and the provider's explanation in the decision record. The next stage may need to change or wait, particularly if daytime solar surplus or evening demand is now different. A staged approach earns its flexibility by responding to evidence rather than treating every original purchase idea as an obligation.
For broader context on hot-water and household electrification planning, browse the Perth solar and electric vehicle planning blog. Use this general reading to refine the questions in your household review, not to replace equipment records, current official requirements or qualified advice for the actual installation.
# Frequently asked questions
## Must I replace every gas appliance at once?
No. A staged plan can follow equipment condition, renovations and household priorities. Necessary safety work should be addressed promptly through qualified people regardless of the preferred sequence.
## Does rooftop solar make all electric appliance use free?
No. Timing, available generation, export value and grid purchases matter. Apply the actual electricity plan and do not assume evening loads run directly on midday solar.
## Is a heat pump always the right hot-water replacement?
Not automatically. Assess service requirements, location, climate suitability, controls, noise and full installation costs. General efficiency figures do not establish suitability for every property.
## Should I buy a battery before electrifying appliances?
There is no universal order. Update the demand and solar-surplus model first. New daytime loads can change how much energy is available for storage.
## What is the best first practical step?
Create the service and condition inventory, gather energy records and identify enabling electrical or building assessments. That gives the next replacement decision a clear brief.
# Conclusion
Staged electrification works when each step delivers a needed service and preserves sensible future options. Coordinate enabling work, use actual demand and review results before adding equipment. Perth solar can support the transition, but the sequence should follow the home, not a package checklist.
# Related Perth solar guides
Explore the companion homepages:
- Creatorlink home — WA Home Battery Basics
- WebStarts home — Perth New Home Energy Planner
- Carrd home — Perth Solar Guide

Solar Panels Perth shares practical guides on rooftop solar, batteries, inverters and switchboards for Perth homes and small businesses, so you can compare options with confidence.How Much Battery Does a Perth Family of Four Need? A 2026 Sizing WalkthroughShort answer: a typical Perth family of four with rooftop solar uses roughly 10 to 15 kWh from the grid between 3pm and 9am, so a battery with about 10 to 15 kWh of usable capacity covers most days. With 2026 federal STCs and the WA rebate, a 14 kWh battery attracts about $5,100 of support for a Synergy customer. The exact size depends on air conditioning, cooking, an EV and how much solar you have to fill it.Step 1: Find your evening and overnight useThe best source is your Synergy interval data. Add up the grid units bought between 3pm and 9am for:- A hot week in January or February
- A cold week in June or July
If you do not have interval data, a rough family-of-four profile might look like this:- Period / Typical loads / Units (summer) / Units (winter)
- 3pm to 6pm / Air conditioning, fridge, kids home / 3 to 5 / 1 to 2
- 6pm to 9pm / Cooking, TV, lighting, dishwasher, heating / 4 to 6 / 4 to 6
- 9pm to 9am / Fridge, standby, overnight cooling or heating, hot water / 3 to 5 / 4 to 6
- Total / 10 to 16 / 9 to 14
These are illustrative bands, not measurements. Your own data is always better.Step 2: Check your solar can fill the batteryThe Bureau of Meteorology reports Perth Airport averages 29.6 MJ/m² of daily solar exposure in December but only 9.3 MJ/m² in June. A 6.6 kW system might produce around 40 kWh on a typical summer day and only about 14 kWh in June. After the family's daytime use, winter surplus can be small.- Solar size / June output (approx.) / Daytime use / Left for battery
- 6.6 kW / 14 kWh / 6 kWh / 8 kWh
- 10 kW / 21 kWh / 6 kWh / 15 kWh
- 13 kW / 27 kWh / 6 kWh / 21 kWh
If you want a 14 kWh battery to fill most winter days, a 10 kW or larger array helps.Step 3: Price the options with 2026 rebatesFederal STCs from 1 May to 31 December 2026: 6.8 per usable kWh up to 14 kWh, 60% of that from 14 to 28 kWh. WA Residential Battery Scheme: $130 per kWh up to $1,300 for Synergy customers. Using an STC price of $40:- Usable capacity / Federal / WA / Total support
- 10 kWh / $2,720 / $1,300 / $4,020
- 14 kWh / $3,800 / $1,300 / $5,100
- 18 kWh / $4,440 / $1,300 / $5,740
Step 4: Estimate savingsSynergy's 2026 rates are 33.2621c per unit on the Home Plan (A1), and on Midday Saver 55.3253c from 3pm to 9pm, 24.3431c from 9pm to 9am and 8.852c from 9am to 3pm.For a family using 12 units a day from 3pm to 9am, a 14 kWh battery that covers most of it on about 300 days a year:- On A1: 12 x 33.26c x 300 = about $1,197 a year
- On Midday Saver: if 7 of those units fall in the 3pm to 9pm peak and 5 overnight, the avoided cost is 7 x 55.33c + 5 x 24.34c = $5.09 a day, or about $1,527 a year over 300 days
That is why battery households often move to Midday Saver.Step 5: Check power, not just capacityA family evening can involve an oven, air conditioner, dishwasher and kettle at once. Check the battery's continuous power output in kW. Many all-in-one systems deliver 5 kW or more; larger systems can do 10 kW. If output is too low, the grid fills the gap at peak rates.A note on reserve settingsMost batteries let you keep a reserve for blackouts. Holding back 20% of a 14 kWh battery leaves about 11 kWh for daily use, which may change the size you need. Families with medical equipment or home offices often keep a larger reserve, especially during summer storm season.Common family-specific extras- Ducted air conditioning: adds several units to summer evenings; consider 14 kWh or more.
- Pool pump: move it to 9am to 3pm instead of sizing the battery for it.
- EV: charge at midday on solar where possible rather than from the battery overnight.
- Teenagers: gaming PCs and late showers lift overnight use.
For a larger option, the specs of a 15 kW all-in-one battery and inverter system are a useful comparison point. Perth installers such as the team at Fusion Sun Solar can model your interval data, and this Perth solar guide's sizing notes include more family examples.Once installed, review the battery's daily charge and discharge graphs after a month. If it regularly finishes the night with plenty left, your usage is lower than estimated; if it empties by 8pm, consider shifting loads or adding capacity later.Frequently asked questionsWhat size battery does a family of four need in Perth?
Usually 10 to 15 kWh usable, depending on evening use and air conditioning.
Will my solar fill the battery in winter?
A 6.6 kW system may only add about 8 kWh after daytime use in June; 10 kW or more helps.
Is a bigger battery worth it after the 2026 taper?
Support per kWh falls above 14 kWh, so size to your actual use.
Should we switch to Midday Saver?
Often yes once a battery covers the 3pm to 9pm peak.
ConclusionMeasure your 3pm to 9am use, check winter solar, then size the battery to match. For most Perth families that lands between 10 and 15 kWh, where 2026 rebates are strongest.

Solar Panels Perth - rooftop energy notes for Western Australian homes. © 2026